print
print

Mono Props

Mono Props FEATURED PRODUCT - Mono Prop Section 2.0 m Mono Props

Mono Props

DESCRIPTION

All mono props are made up with a base jack whose height may be varied between 280mm and 550mm and a flat head piece with a height of 145mm or a head jack with a height adjustable between 320mm and 580mm.

SUITABLE FOR

Able to support heavy loads at considerable height Savings in labour and transport due to high load capacity Mono Props braced in groups can support exceptionally heavy loads Interchangeable sections? Fine adjustment by screw jacks

YOU MAY ALSO NEED

print

COMPARE & BOOK

MODEL / SIZE CODE  
Mono Prop Base Jack 28050
Mono Prop Couplers 28055
Mono Prop Flat Head 28060
Mono Prop Head Jack 28065
Mono Prop Section 1.2 m
1200mm:
45kg
28070
Mono Prop Section 1.5 m
1500mm:
49kg
28075
Mono Prop Section 2.0 m
2000mm:
60kg
28080

DISCLAIMER

All images and product specifications have been reproduced for your convenience to assist you with product enquiries only. Coates Hire cannot guarantee that the information is free from error, omissions, or is exhaustive. Coates Hire makes no representation that any of the products are suitable for your purposes, and you acknowledge that you have relied on your own skill and judgement in this regard. Coates Hire will not be held liable for any claim, loss or damage arising from the use of, or reliance on, the information on this website. Please contact a Coates Hire representative for detailed product information.

find a branch FIND A BRANCH

phone us 13 15 52
TOP

Mono Prop Hire | Rent Mono Propping Equipment | Coates Hire

The Mono Props is available for hire right across Australia, and with over 200 branches, you can be sure we will deliver the best Mono Props for hire in your area. Find a local branch that stocks specialist Mono Props for hire below.

find your nearest storeFind your nearest store