print
print

Sand Pumps

Sand Pumps Sand Pumps

Sand Pumps

DESCRIPTION

Sandbug pumps can move up to 80t/hr of dry solids when used with an HH125 pump. They can maintain solids in suspension for up to 500m in 150mm line/hose, but you will require a water flow rate of 9 – 40L/sec at 400kPa to 1300kPa.

YOU MAY ALSO NEED

print

COMPARE & BOOK

MODEL / SIZE CODE  
Sandbug 30135

DISCLAIMER

All images and product specifications have been reproduced for your convenience to assist you with product enquiries only. Coates Hire cannot guarantee that the information is free from error, omissions, or is exhaustive. Coates Hire makes no representation that any of the products are suitable for your purposes, and you acknowledge that you have relied on your own skill and judgement in this regard. Coates Hire will not be held liable for any claim, loss or damage arising from the use of, or reliance on, the information on this website. Please contact a Coates Hire representative for detailed product information.

find a branch FIND A BRANCH

phone us 13 15 52
TOP

Sand Pumps Hire | Coates Hire

The Sand Pumps is available for hire right across Australia, and with over 200 branches, you can be sure we will deliver the best Sand Pumps for hire in your area. Find a local branch that stocks specialist Sand Pumps for hire below.

find your nearest storeFind your nearest store